Hi All,

I have read over and over again in the workshop manual, how to set the park brake in to service mode (Painting calipers)

Ignition on (Engine not started)
Now press park brake switch down and hold.
Two seconds later, press and hold accelerator down.
Two seconds later (Still holding down park brake switch and accelerator pedal, switch off ignition then straight back on.
Then release both.

Then.... nothing, nothing happens. If i now turn ignition off, park brke re-activates.

It worked on my 2014 ok, had a message on the dash etc. My 68 plate does nothing????
[/list]