I'm just about to install an EasyLift module. Ooh, I like the container. It even has a pressure exchange vent. I wouldn't be surprised if it complies with MIL-STD 810!

Explain more please to the lesser knowledgeable one......

Steve. 2006 2.7 TDV6 HSE in Cairns Blue.

Been using one for nearly 2 years now, great bit of kit, did you buy via group buy on Disco forum for the discount  2003 BMW M5 - 5 Litres of V8 Optimax Slurping Goodness in Carbon Black

2013 SDV6 HSE Black Edition- Orkney Grey with Ebony & Ivory. LR Facelift RAI, Genuine G4 Expedition Rack, 4x Warn SBD-160 Spotlights, Warn 9.5XPS Winch, Mantec Underbody Protection and Sump Guard, Full Easy Lift Suspension Module, LR Light Guards, Light Force HTX230 Hybrid spotlights, 18” Compomotive PD1881 on 265/65/18 BF Goodrich KO2, ARB fridge, TuffTrek awning 😎

Last edited by Buckster on Wed Feb 20 2019 9:15pm. Edited 1 time in total

They come from here (and with whom I have no connection) and give control over the suspension, giving more options and up to 100 mm lift on command (via a switch or 'phone app).

It's not as if the module is going to be fitted/removed/fitted but it is supplied in a particularly robust container that I will put to an appropriate use after it is empty. Mind you, to get from Italy to here in a couple of days, it probably needs some decent protection.

Here is group buy on Disco 3 if anyone is interested

https://www.disco3.co.uk/forum/easy-lift-s...t=Easylift 2003 BMW M5 - 5 Litres of V8 Optimax Slurping Goodness in Carbon Black

2013 SDV6 HSE Black Edition- Orkney Grey with Ebony & Ivory. LR Facelift RAI, Genuine G4 Expedition Rack, 4x Warn SBD-160 Spotlights, Warn 9.5XPS Winch, Mantec Underbody Protection and Sump Guard, Full Easy Lift Suspension Module, LR Light Guards, Light Force HTX230 Hybrid spotlights, 18” Compomotive PD1881 on 265/65/18 BF Goodrich KO2, ARB fridge, TuffTrek awning 😎

HughN wrote:

They come from here (and with whom I have no connection) and give control over the suspension, giving more options and up to 100 mm lift on command (via a switch or 'phone app).

It's not as if the module is going to be fitted/removed/fitted but it is supplied in a particularly robust container that I will put to an appropriate use after it is empty. Mind you, to get from Italy to here in a couple of days, it probably needs some decent protection.

I hope so. My car's in for a service at the moment but I should get it back before the w/e.

HughN wrote:

I'm just about to install an EasyLift module. Ooh, I like the container. It even has a pressure exchange vent. I wouldn't be surprised if it complies with MIL-STD 810!

It is STANAG 4280 and DEF-STAN 81-41 compliant

why spend so much money for make a box to throw away?
I preferred to give something beautiful, useful and reusable

Its a very very nice box