Just a quickie. When I park at the top of my drive (fine down the bottom), the rear drivers side corner cocks it`s leg up. Now I know they sometimes auto level but where it`s parked is pretty level...if anything, there`s a very slight slope from driver to passenger side. Would it need calibrating after having a new compressor?

This is what it looks like...


 Steve.

 Steve.

I don't think it requires cal. after compressor replacement.

It might need cal. anyway though.

You should measure the heights

park on FLAT SURFACE.
go to off road height
go down to normal
switch eng off
leave door open

measure from the arch lip, to centre of wheel.

rear should be higher.

measure in mm (or cm)

I`ll try that cheers. It`s weird though, cos as soon as I unlock it, it goes back down and when I move it down the drive it sits ok! Not a major issue....I just like to know what`s going on  Steve.

Distance from centre of drive shaft to lip of wheel arch is 462mm front, 463mm rear. 2012 SDV6 - it's missing a couple of cylinders
2008 TDV8 - it was a labour of love and is much missed

1mm difference?  Steve.