As title, any body know of any Remap’s that can be done via obd without ecu tampering?

Yes.... the Alive tuning is done via ODB

So this is not for the car in your signature then there are only certain cars that can be done if you look on disco 3 i think bodsey talks about them some can be done without opening the ecu other'e cant

My understanding is:
SDV6 needs ECU opening
TDV6 doesn't and can be done via OBD
But clarify what year you are asking about and the pros on here will confirm route
Or just call Alive or BAS  Visitor from fullfatrr.com
* GONE. 2012 RR Sport HSE SDV6 Orkney Grey. Now being piloted by RRSTDV8
* GONE: 2011 4.4 TDV8 Full Fat. Amazing piece of kit.
* Current. 1974 Lightweight 2.25L petrol. Old skool
* GONE. Freelander GS TD4 Manual MY2013. Orkney Grey with privacy, cold and clearview packs, armrests (a must!) and a spoiler.
* GONE. Range Rover Classic '93 200Tdi Factory fit
* 1949 80" in family since 1975

According to the ALIVE website, you can map the 190ps 2.7 TDV6 which is the one that the OP has.

But he is asking about the 3.0 tdv6 not the 2.7 but as DrRob says let him tell which before we all start speculating and throwing things back and forth

Sorry. My mistake!! I looked at his profile rather than the title.

Sorry guys I forgot to update my profile since getting a new rrs it is the 3.0 tdv6 2011 year model
I will check with alive and bas and see what they say

Thanks

Have a read here

https://www.disco3.co.uk/forum/topic145945...3.0+TUNING

What about the 5.0SC can that be done 510 to 600ish would be nice

Andy. Andy.
21 Ford Ranger
Gone but not forgotten
Focus RS Red Edition
2015 RRS AB Fuji.
2014 RRS SC Santorini
2016 VW Amarok
2014 RRS AB Fuji
2012 RRS Red Edition Fuji
2015 Nissan Navara
2012 RRS SE Santorini
2008 RRS White
2007 RRS Santorino

Yes had my 5.0L S/C done about 18 months ago by Alive, had S/C pulley up-graded as well. 560-580 bhp and 749.9Nm torque. The torque was Dyno reading.The Bhp was their estimate based on graph reading from dyno. as I think the engine ecu was restricting them getting accurate reading in someway or something like that, can't really remember exactly the reasons.

Apologies to OP for deviating from original question.

Cheers
Col

I believe the only 3.0 that can be done by OBD currently is the 16MY, possibly 15MY...

Currently, everything else is a bench job

Yes alive just confirmed this, they are also quite exspensive compared to the local tuning companies . I would have traveled and paid for an obd tune but it’s it possible. There is a quantum dealer in hull and his prices are very reasonable

Thanks for the input

I wouldnt trust any local cheap company! You get what you pay for and Alive and BAS have a long proven track record playing with LandRovers.

A cheap map makes an expensive rebuild  2003 BMW M5 - 5 Litres of V8 Optimax Slurping Goodness in Carbon Black

2013 SDV6 HSE Black Edition- Orkney Grey with Ebony & Ivory. LR Facelift RAI, Genuine G4 Expedition Rack, 4x Warn SBD-160 Spotlights, Warn 9.5XPS Winch, Mantec Underbody Protection and Sump Guard, Full Easy Lift Suspension Module, LR Light Guards, Light Force HTX230 Hybrid spotlights, 18” Compomotive PD1881 on 265/65/18 BF Goodrich KO2, ARB fridge, TuffTrek awning 😎

My cheap remap cost my £7k in repairs in the long run...

Save your couple hundred quid at your own risk