Hi,

I have some problems that have been coming on and off on my late 2006 RRsport HSE

Reboots
The main screen ”reboots” a few times (2 to 4 roughly) when starting the car.
What’s strange is that it hasn’t done if for a while, and to some extent this seemed to be linked to low temperatures which we really don’t have now.

EAS defaults
Rarely (once every month or a bit less), I’ll be driving on normal road at normal speed & I’ll get an EAS default message, telling me to drive under 50KMH. The suspension becomes rigid & bouncy.
If I stop the car & engine, remove the key & restart, then all gone, at first or second attempt (was this morning).
This part is worrying me.

Driver side repeater
I’ve changed it for a white one and it used to work from time to time and doesn’t anymore
Unmounting it showed that the wires had been taped.
If I remember well, this circuit had some importance (was it on a D3, on an L322?).

So…
I’m wondering if I don’t have an overall problem and if not how to tackle with these especially the EAS one.

Thanks!

Dear friends, any clues ?

Get your codes red first to see if you have anything stored

Right, of course you're right, I'll do that.
ps : it's been a while since I last checked so is there an affordable tool to read & reset error codes or forced to go to dealership?
thanks again

I use an IID tool and so does a lot of others on here

IID Tool makes sense but at roughly 500€, I'd bette go to the dealer if it's occasional.
Is that one a good alternative?
http://www.ebay.fr/itm/NT510-for-LAND-ROVE...Swa~BYeEZe

Thats the one I have and I highly recommend it. Does all that the iid does but isn't limited to one chassis number. I have just replaced my nsr height sensor then calibrated my suspension height with it.

Did not think that tool could program 3 flash and clock on dash. sat nav on the move etc or am i wrong

Thanks for the answer, so it also manages EAS issues (ie display & clear codes)?