Hi all,

I have a new MY16 AutoBio which has Auto High Beam Assist as standard, together with Auto Lights. The auto lights turn on and off perfectly, but the auto high beam assist does not function. The manual states that this feature can be turned on and off in the "Driving Features" menu, together with a choice of "Drive on the Left" or "Drive on the Right". These items are all missing from the menu so I seem to have no way of activating AHBA!!

Secondly, the stalks on the steering column for the headlights and wipers are not illuminated at night, unlike the steering wheel controls, so any changes and selections must, at night, be done from memory. Is this correct? Are yours illuminated (lit from within)?

Any ideas?

H.

I have the ability on the menu to turn on and off the HBA and also choose which side of the road I am driving on;

Stalk controls are not illuminated at night though.

Hope that helps

Many thanks,

I can forget about the illuminated stalks then....probably would be a distraction at night anyway!

However, the menu items are definitely missing so I'm off to my dealer!

H.

Last edited by Hedders007 on Thu Sep 10 2015 12:37pm. Edited 1 time in total

Some items in the dash menu seem to get disabled if you have the engine running and only get re-enabled if you have the engine off but power to everything else, what would be position 2 in a keyed ignition. eg if I have the engine running I cannot check tyre pressures, turn the engine off but with power to everything else then I can access the TPMS! I don't have the AHBA on this car, I did on my last Evoque and found that sometimes using the manual dip via the column stalk would override the auto dipping for ages. 2020 Pangea Green 1st Edition D240 New Defender 110 is here and loving it
2018 Melting Silver Mini Countryman PHEV - soon to be replaced
2015MY Corris Grey SDv6 HSE Dynamic, the best car I have ever owned, totally reliable only a cou0le of rattles in 3 years, now no longer in my care
Also in my garage is a 1996 TDi300 Defender 90 County HT made into a fake CSW

I can confirm that AHBA is available whilst driving, under driving features I think in the menu! 2014.5 Mariana Black 5.0 Supercharged V8 Autobiography

Hi Tim,

Many thanks for reply.

I took the car to the dealer this morning and we all agree that the car should have AHBA. However, they confirm that the menu items are indeed missing! The AHBA is on the build sheet, but not configured on the car!

Dealer taking the car in for a couple of days at my convenience to reconfigure software in conjunction with factory so all should then be fine.

Car otherwise perfect and the dealer could not have been more friendly or helpful. Well done Caffyns of Lewes, Sussex.

Best wishes to all,

H.

Good that they found out what the problem was! Someone at the dealership didn't carry out the PDI very well did they? 2020 Pangea Green 1st Edition D240 New Defender 110 is here and loving it
2018 Melting Silver Mini Countryman PHEV - soon to be replaced
2015MY Corris Grey SDv6 HSE Dynamic, the best car I have ever owned, totally reliable only a cou0le of rattles in 3 years, now no longer in my care
Also in my garage is a 1996 TDi300 Defender 90 County HT made into a fake CSW

Hi Folks,

I may not be alone on this!

My dealer this morning received a bulletin from the factory that this is a known problem.

It only affects MY16 RRS and FFRR with TFT instrument panel and WITHOUT "Lane Departure Warning" and "Traffic Sign Recognition" fitted.

Currently under analysis, and a Technical Service Bulletin will be issued in the near future stating the repair procedure....

Anyone else had the same issues yet?

H.

You're right!

Just popped on Topix to find: SSM72424 - Auto High Beam Option Unavailable - 16MY Only.

Not a subscriber though so don't know what it contains!

It says just what I posted above. Only other thing it said was telling the dealers to not attempt any repairs or diagnostics at this stage and await further analysis from the factory together with the fix when it's ready.....

Does manual dipping still work properly, because if it doesn't you might have an unroadworthy car. And we all know how long LR can take to ignore (sorry fix) what they would normally term a "characteristic" of the car because they cannot think of a fix! 2020 Pangea Green 1st Edition D240 New Defender 110 is here and loving it
2018 Melting Silver Mini Countryman PHEV - soon to be replaced
2015MY Corris Grey SDv6 HSE Dynamic, the best car I have ever owned, totally reliable only a cou0le of rattles in 3 years, now no longer in my care
Also in my garage is a 1996 TDi300 Defender 90 County HT made into a fake CSW

Hi Tim,

Yes - manual dip and high beam works perfectly, as does the Auto lights on and off. The only bit not working is the Auto high beam /dip beam. It probably would work if only there was a menu item to select the function to "on"! That's what we are waiting for....

H.

I am also missing AHBA menu items. MY16 AB without lane departure warning and traffic sign recognition. Will get this looked at during dealer visit for fuel tank sloshing. Current: Volvo XC90 T8 Inscription Pro PHEV with some optionals on top
Gone: MY16 RRS2 3.0 SDV6 Autobiography Dynamic, Carpathian Grey & Santorini Black Sliding Pano/Ebony & Ivory 2 Tone
Gone: MY13 RRS 3.0 SDV6 HSE Black Edition, Orkney Grey/Ivory
Gone: MY09 RRS 2.7 TDV6 HSE, Santorini Black/Almond

Hi fkarim,

As I mentioned in earlier post your dealer can do nothing at this stage! I'm waiting for mine to receive notice from the factory that there is a software update for us which is indeed being worked on, but not yet available. The only thing left is patience....
Hope it's soon!!
H.

Thanks. I misunderstood. I thought it was just a matter of enabling AHBA in the CCF. Current: Volvo XC90 T8 Inscription Pro PHEV with some optionals on top
Gone: MY16 RRS2 3.0 SDV6 Autobiography Dynamic, Carpathian Grey & Santorini Black Sliding Pano/Ebony & Ivory 2 Tone
Gone: MY13 RRS 3.0 SDV6 HSE Black Edition, Orkney Grey/Ivory
Gone: MY09 RRS 2.7 TDV6 HSE, Santorini Black/Almond