Went to get the hunter wheel alignment done today. Kwik Fit have the service and I have one down the road and went in.

10 minutes later the guy came in and said he couldn't make any adjustments because he couldn't connect via the OBD port and told me that I needed to go to a dealership? Anyone heard of this or was the guy a chump?

Advice appreciated! 2006 HSE for Sale - £7,499 (Manchester)
http://www.rrsport.co.uk/forum/topic46383.html

Chump
Had mine done 2 weeks ago on hunter kit, no probs

Not necessarily. RRS suspension should be put in tight tolerance mode before alignment which is done by connecting a suitable diagnostic tool via the OBD port. May be they didn't have the right tool but knew it was required. The local Hunter place I take mine to (not Kwik Fit) connects a computer via OBD port (don't know for what) after I have put the car in TTM using my IIDTool and removed it. Current: Volvo XC90 T8 Inscription Pro PHEV with some optionals on top
Gone: MY16 RRS2 3.0 SDV6 Autobiography Dynamic, Carpathian Grey & Santorini Black Sliding Pano/Ebony & Ivory 2 Tone
Gone: MY13 RRS 3.0 SDV6 HSE Black Edition, Orkney Grey/Ivory
Gone: MY09 RRS 2.7 TDV6 HSE, Santorini Black/Almond

My tyre place doesn't have a way to put the RRS into TTM but they're open about it and know that it should be done. I just use my IID to do it. 2012 SDV6 - it's missing a couple of cylinders
2008 TDV8 - it was a labour of love and is much missed

Quite a few have had it done without though without issues. It'd be an interesting one to see some really detailed comparisons of, but very difficult to measure, of course. Visiting from DISCO3.CO.UK
2006 Discovery 3 TDV6 Auto HSE Zambezi Silver

Alignment can be done without putting into TTM.

Have had a few alignments done, some I have put into TTM myself, and some without, and never had an issue with tyre wear etc

So it's fine to get it done without? Really need it completing Friday before we go away. 2006 HSE for Sale - £7,499 (Manchester)
http://www.rrsport.co.uk/forum/topic46383.html

Just getting the car done now, hunter alignment, 4 wheels balanced.

Caster on the front and rear were out Massively on the drivers side, along with the toe & cambers.

Hopefully a more pleasant drive now! 2006 HSE for Sale - £7,499 (Manchester)
http://www.rrsport.co.uk/forum/topic46383.html

Cost to do? Visitor from fullfatrr.com
* GONE. 2012 RR Sport HSE SDV6 Orkney Grey. Now being piloted by RRSTDV8
* GONE: 2011 4.4 TDV8 Full Fat. Amazing piece of kit.
* Current. 1974 Lightweight 2.25L petrol. Old skool
* GONE. Freelander GS TD4 Manual MY2013. Orkney Grey with privacy, cold and clearview packs, armrests (a must!) and a spoiler.
* GONE. Range Rover Classic '93 200Tdi Factory fit
* 1949 80" in family since 1975

All in £108.

Needed Front & back adjusting, plus wheels balanced. 2006 HSE for Sale - £7,499 (Manchester)
http://www.rrsport.co.uk/forum/topic46383.html

Who did it in the end? Kiwik Fit? Visitor from fullfatrr.com
* GONE. 2012 RR Sport HSE SDV6 Orkney Grey. Now being piloted by RRSTDV8
* GONE: 2011 4.4 TDV8 Full Fat. Amazing piece of kit.
* Current. 1974 Lightweight 2.25L petrol. Old skool
* GONE. Freelander GS TD4 Manual MY2013. Orkney Grey with privacy, cold and clearview packs, armrests (a must!) and a spoiler.
* GONE. Range Rover Classic '93 200Tdi Factory fit
* 1949 80" in family since 1975

Yeah Kwik fit. The lad who did it was brilliant and talked me through everything. The lad from the other day (and other branch) looked like a numpty so it's probably best that he told me he couldn't do it! 2006 HSE for Sale - £7,499 (Manchester)
http://www.rrsport.co.uk/forum/topic46383.html

Hi Guys,
On my visit to Quick Fit, the book-in supervisor told me, Quote, " We do not touch alloys over 18", as they may be get damaged". Result went to a competitor in town and had excellent service. I will not cross QF's door ever again! Happiness is driving a RRS