I am looking to fit some wheel spacers but I can only find 30mm, now I'm guessing that is because they are studs is this correct? Also will 30mm be too much for the front? I have 20" wheels but unsure on the offset so will post a pic and hope that helps. If anyone has fitted spacers and has a picture that would be great.





Last edited by Si-W85 on Sat May 16 2015 6:44pm. Edited 1 time in total

Can nobody on this forum help :/ I can't believe nobody on here has any experience with wheel spacers

I do t have spacers on mine, but have fitted plenty for others. 30mm is the max I'd go with. (Remember it's 60mm overall width increase).
It does make the wheels have a slightly more sure footed stance IMHO.  Bodsys Brake Bible
Software Updates Contact me
RRS Timed Heat/Remote kits - Contact me
BAS Engine Re-maps/ EGR Blank EuIII and EuIV
Clock On The Dash/ SNOTM /3Flash / BT Update /Service Reset/Error Codes read\ Gearbox Reset
See it HERE

What do they sit like when on Bodsy I think the rears should be ok but don't want the fronts to stick out further than the arches? Thanks for the reply

Quite a few do 20-25 front and 30 rear just to let it sit differently. Probably 20 front would still be good. Discos wok well with 30 front, but it can look marginally out of the wheel arch( just) Bodsys Brake Bible
Software Updates Contact me
RRS Timed Heat/Remote kits - Contact me
BAS Engine Re-maps/ EGR Blank EuIII and EuIV
Clock On The Dash/ SNOTM /3Flash / BT Update /Service Reset/Error Codes read\ Gearbox Reset
See it HERE

Think I'll get a set of 4 30mm terrafirma and if the fronts sit out too far skim them down to suite. Cheers