Looking at the Handbook extract reproduced below, I note that auto application of the park brake can be prevented but it is not clear whether it is disabled for just a single application, or whether going through the sequence described will disable the auto application feature until some action is taken to re-enable it.

Can anybody clarify please?



Applying the EPB automatically
EPB will be applied automatically if the ignition
is switched off and the vehicle speed is below
3 km/h (2 mph).
To prevent an automatic application, when the
vehicle is stationary press and hold the EPB
switch in the release position. Within 5
seconds switch off the ignition and hold the
EPB switch for a further 2 seconds