I am correct in saying when you put the rr into reverse there should be a quick bleep and then as you get closer to objects a the quicker the bleep the closer you are to eventually it becomes one continuous bleep?


mine you put it into reverse and it beeps at you constantly all the time. Any ideas folks??

That would be correct

There are 2 failures. A long tone, that goes off after a few seconds, and the warning light flashing on the centre of the dash is a failure of a sensor/wiring issue

If it is a constant tone, with the orange light on, then it is known as a false warning

Both will require plugging into a diagnostic computer, to check for fault codes, and/or live display

mine don't beep when put into reverse, unless close to an obstacle  RR Sport Supercharged Vesuvius Orange 4.2 V8 First edition

Prefer RR Vouge S/C but they don't do Orange !

disco-mikey what do you mean by and/or live display?

also is the diagnostic machine a special one or will any garage have one?

I have 2 sensors on the front giving false warnings, as seen in the picture. Was captured using the IID graph function, while checking live values

i have just replaced both looms and 8 new sensors to get mine working again lol