Has anyone got the measurements of wheel arch access height measurements, like centre of wheel to bottom of arch etc..

Mine isint sitting level and i need to work out if its the front or rear thats out...

Is there any standard measurements to go by ?

cheers

lol ok so no measurements I take it then,

can a kind rrs owner with 20in wheels, measure from the floor to the bottom of the wheel arch above the tyre front and back when in access mode and give me the measurement and I will buy them a virtual drink ??????

This id the height they should be in "Normal" mode.

http://www.disco3.co.uk/wiki/IIDTool_Calibration_Values In Spain - 2018 F Pace - Frightened away from the Sports due to crank failures
Gone - A couple of RRS, A couple of Disco's. However thinking of another Sport.

Hi, thanks for the reply, ive seen that and in normal mode it sits level, its in access mode its not level, that's why I want the measurement to see if its the front to low or rear to high..

Hi Locust, just had a measure for you and my front wheel arch is 775 mm from the floor measured through the wheel centre and the rears are 788 mm. Got some time this afternoon so if you want any other measurements let me know, regards rigsby MY16 AUTOBIOGRAPHY Indus silver with some toys

2012 3.0 SDV6 Luxury gone, but a great motor

you sir, are a legend !!! range is at home so will check this out later when im home