Can anybody tell me how long it will take to change the front lower suspension arms on my 06 RRS and how long Landrover allow. Thanks.

If the bolts come out without needing cutting then its a couple of hours per side..

Flack

Ok thanks for that flack

Even if they do need cutting, its still a couple of hours per side

2 hours max, and I believe I did it even in less than 1,5 hours last week.

-jack car up, remove wheel, take centre cap of the rim and put wheel back.
-jack car down.
-now mark possition drive shaft nut and take of the drive shaft nut.
-jack car up and put on axle stands
-take wheel of and plastic gearbox protection.
-mark position of the allignment bolts with marker
-release bolt of lower suspension arm bolt, and jack up suspension arm, use hammer to release boltjoint from arm.
-lower jack
-remove shockabsorber bolt and the two already marked suspension arm bolts.
-now pull the wheel hub towards you while the driveshaft slides slightly out of the hub and you should be able to remove the complete suspension arm from the car.
-with the hub in current possition put the new arm back in put everything back in place.

If the bolts come out

If they do, it takes 40 minutes a side