Hi All,

I recently fitted two lower wishbones to my 06 RR Sport 2.7D as lower ball joints had gone, I fitted one side at a time left side first and then drove the car..all was fine and then fitted right side. When complete I went for a test drive and imediately had suspension and DSC warning lights flashing at me,the system recorded suspension in low position. I tried recycling the ignition which worked briefly but having driven another 50 yards or so, the failure lights came on again and I could tell the suspension had lowered again. I had not disconected any wires or plugs when carrying out the wishbone replacement..so am confused as to what has occured. I have had no previous issues with the suspension and all was working well before hand.
If any one can help,I would be most grateful for any advice..I dread taking back to LR as my credit card had to be rushed into casualty at the last service visit!

Many Thanks in advance.

Mike Mike