Guys

Might be getting 4 x 22inch wheels and Toyo tyres off a P36 and the tyres are 295 (not 285)/30/22 and not sure if they will fit my RRS and fit over the brembos etc.

Can anyone help please? TDV8 HSE, Remap (+45 BHP + 100 Nm), Taylored sport exhaust system by Pipe Werx
20" HST alloys, Privacy glass, Side steps, Xenon Adaptive Lighting, Adaptive cruise control

I would never go 30 profile on 22's you will destroy your wheels at the first pot hole you run over knacker your suspension in no time at all and all your fillings will fall out minimum 35 profile on 22's i'd recommend, i'm sure you know to check the load weight of the 22's and i havn't heard of any 22's not fitting over brembo's as long as they are for a RRS and are the correct offset you should be fine.

I was also thunking the same as seem very very low profile. They are of a P36 (larger range rover vogue I think that is) and doing a trade in for my HST 20 inches with Continental tyres. The others have 295/30/22 on Toyos TDV8 HSE, Remap (+45 BHP + 100 Nm), Taylored sport exhaust system by Pipe Werx
20" HST alloys, Privacy glass, Side steps, Xenon Adaptive Lighting, Adaptive cruise control

The profile is only 10mm of a difference so it shouldn't have much of an effect but alloys are generally expensive so any extra protection you can give them the better.
Your speedo will read slightly different tho