I had a bit of a scary experience today whilst travelling up the motorway!

One minute everything is calm, the next.....wind and vibration noise from what I thought was the roof, which turned out to be the top beading of the windscreen surround.

Apparently, I was lucky as there was nothing holding it in, the expert said that you have to add the sealant, then move the windscreen upwards to get a proper seal - obviously part of the process missed on my car.

Anyway, job done in 2 minutes - it may happen to you! '' .

There is absolutely no substitute for a genuine lack of preparation.


TDV8 HSE MY10 with pretty much everything including a vase of daffs on the back shelf, tropical fish collection in the centre console, hamsters in the spare tyre and finally sheep on the passenger seats.....for weight distribution, what else??

.

Cheers RAD, good post Is there something specific that I could look for or is it something
the dealer would need to check for? 2013 Discovery HSE Luxury - 3.0 SDV6 - Santorini Black
2013 Evoque 5 Door Pure Tech SD4 - Orkney Grey with Panoramic Roof (Mrs E's new baby)

GONE - RRS - 3.0 TDV6 HSE - Santorini (2010)
GONE - RRS - 2.7 TDV6 HSE - Java Black (2007)
GONE - Porsche Boxster S - 3.2 - Black

Good question!

Its really obvious if the beading is coming away from the windscreen surround. You'll hear all about it if its loose, otherwise suggest you leave well alone.

I doubt a LR dealer would be much help if it does happen, suggest you go to a windscreen specialist with a mastic gun, its amazing what a fiver will do!'' .

There is absolutely no substitute for a genuine lack of preparation.


TDV8 HSE MY10 with pretty much everything including a vase of daffs on the back shelf, tropical fish collection in the centre console, hamsters in the spare tyre and finally sheep on the passenger seats.....for weight distribution, what else??

.