2008 service light reset,can this be done manually or is it a diagnostic machine job

MY08-09 can be reset manually, see below. 05-07s need to be hooked up to IDS to reset the SII. Not sure about 2010s,

* A. Press and hold the trip reset button.
* B. Turn the ignition switch on to the ignition position II.
* C. If the SII function is enabled the information display will flash 'SERVICE' for 5 seconds and then display 'SERVICE' constantly. If the SII function is not enabled the information display will show the normal odometer and trip information.
* D. If the trip reset button is released within 10 seconds of entering the reset mode, the information display will show 'DIST'. If the trip reset button is not released after 10 seconds the instrument cluster will exit the manual reset procedure.
* E. If the oil service value is to be reset, press the trip reset button within 10 seconds of releasing it and hold for more than 5 seconds. The information display will show 'RST' for 5 seconds and then reset the oil service value, the display will then show ‘END’.
* F. If the trip reset button is pressed for 5 seconds the display will exit the reset routine.
* G. If the trip reset button is not pressed for more than 10 seconds, then the information display will exit the reset routine. 

thanks for that ,if anybody has got 2010 service reset would be helpful when time comes for my new 3.0 td cheers