hi folks, I hope someone may be able to help me out and advise me on what brakes I have on my rangey, I've took a couple of shots, I'm not sure if they are original or what the pot sizes are. First pic is of the rear, second the front, apologies for the pics it's really dull here today and it was a bit difficult lighting the shots up.

Cheers in advance

Dan

Click image to enlarge

Click image to enlarge

you have the TRW rear and brembo front by the looks of it, which is standard. looks like they've both been cleaned up/repainted. Recently bought a 2007 RRS HSE TDV6 for a Pimp-My-Ride-Project.
DONE: Meduza front bumper, AB rear bumper, AB tailpipes, calipers repainted, rear upper tailgate upgrade, side steps, AB front grille, AB side vents, rear LED lights, clear side repeaters, integrated daytime running lights, LED headlights.
TO DO: color code sills and pillars.

Thanks for the reply Tanloverluke, I have been trying to work out what I have but I find fronts that look like that that are 6 pot and 4 pot! And the rears I've found single pot and twin pots. Would I be right in thinking the fronts have 4 pots (2 each side) and the rears have 2 pots (1 each side)?

Sorry these are likely right noob questions, I've just never done brakes before.

i'm pretty sure your brembos are 4 pot, the supercharger are 6. as for the rear i'm unsure but i think they're 2 pot. Recently bought a 2007 RRS HSE TDV6 for a Pimp-My-Ride-Project.
DONE: Meduza front bumper, AB rear bumper, AB tailpipes, calipers repainted, rear upper tailgate upgrade, side steps, AB front grille, AB side vents, rear LED lights, clear side repeaters, integrated daytime running lights, LED headlights.
TO DO: color code sills and pillars.

Front Brembo's are 4 pot on pre 2010 models. 6 pot on 2010>on

Non Brembo fronts are all twin pot

All Rears are single

Cheers for your time mate.

Now I wonder if the supercharger 6 pot would fit the front of mine and move the 4 pots to the back!

Thanks Mikey, I was a little nervous answering that question, was hoping someone like you would come along  Recently bought a 2007 RRS HSE TDV6 for a Pimp-My-Ride-Project.
DONE: Meduza front bumper, AB rear bumper, AB tailpipes, calipers repainted, rear upper tailgate upgrade, side steps, AB front grille, AB side vents, rear LED lights, clear side repeaters, integrated daytime running lights, LED headlights.
TO DO: color code sills and pillars.

The 6 pots are a bolt on upgrade, but you need new discs, pads, and backplates. Possibly new flexi pipes too...


Rears won't fit at all

Cheers Mikey, shame they won't fit on the rears, is there a 4 pot similar callper that does by any chance? I've seen the 4 pot brembos that are like two and a half grand, just wondering if there were similar ones land rover have done!

The B6 Armoured D3/RRS list a "Brembo" type caliper for the back end.

http://modelandrover.com/braking/brake-caliper-rh-17670.html

Calipers are £1350 each
Discs are £1630 each
Brake pads are £691...

All prices taken from Microcat...

Wow that's the prices for what you linked

Can removing a wheel throw out all your air suspension levels? I followed the manual for wheel changing, but afterwards the front seems lower in off road and road levels, looks normal in load height, they did come up all at the same speed before but now the front end seem sluggish and doesn't seem to be as high as before. 2007 RRS 2.7 HSE - Java Black