|
|
||
RRSPORT.CO.UK |
||
| Forum Gallery Shop Sponsors |
| Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
 | Home > General > EPB Fault again - Should this be a sticky as per D3 |
 
|
|
|
|
| Zilch Member Since: 20 Mar 2006 Location: Sydney, sometimes the Whitsundays Posts: 2835   
|
The EPB started screaming like a banshee again this morning, only shuts up if i release it again. That will be the fourth or is it fifth time is has been seen to, twice for the squealing, and about 2-3 times in terms of not fully releasing.
|
||
Mon May 12 2008 11:00am |
|
| Zilch Member Since: 20 Mar 2006 Location: Sydney, sometimes the Whitsundays Posts: 2835
|
Tim, it has not been off-road since the last service about 6 weeks ago, when the EPB was cleaned, lubricated and whatever they do to it to cure the notorious binding that occurs every time i release it. It had a complete EPB rebuild last year and that still did not totally cure it, only the banshee wail every time i engaged the thing. I think along with the D3's there must be an inherent design problem. Cheers Jim Another Pommie Bar Steward down under MY20 Defender 110 SE P400 Eiger/Ebony MY10 3.0 RRS TDv6 Fuji/Ebony/Anigre |
||
|
Mon May 12 2008 11:53am |
|
| Zilch Member Since: 20 Mar 2006 Location: Sydney, sometimes the Whitsundays Posts: 2835
|
Seems a well discussed topic on the D3 site http://www.disco3.co.uk/forum/topic14861.html
|
||
|
Mon May 12 2008 12:01pm |
|
| Supertrotter Member Since: 10 Mar 2006 Location: Brrrr.... guess where :o( Posts: 9905 
|
Ours has just started doing it today.
|
||
|
Mon May 12 2008 5:45pm |
|
(| Alicatt Member Since: 11 Jun 2007 Location: Eating in Eksel or Ice cold in Alex Posts: 1435  
|
mine started squeaking for a bit after the offraoding I done at the weekend, but I think it was more a case of the sand in the disks |
||
|
Mon May 12 2008 7:18pm |
|
gave it a pull on at low speed and it has been quiet ever since ... touch wood....| Bobby Member Since: 07 Jun 2005 Location: Kuala Lumpur Posts: 3781  
|
There is a TSB on "EPB Screech On Apply/Release When Stationary", issued early April. Malaysia Boleh!
|
||
|
Tue May 13 2008 8:08am |
|
| Zilch Member Since: 20 Mar 2006 Location: Sydney, sometimes the Whitsundays Posts: 2835
|
Bobby can you post it Thanks Jim Another Pommie Bar Steward down under MY20 Defender 110 SE P400 Eiger/Ebony MY10 3.0 RRS TDv6 Fuji/Ebony/Anigre |
||
|
Tue May 13 2008 9:07am |
|
| Bobby Member Since: 07 Jun 2005 Location: Kuala Lumpur Posts: 3781
|
the first page of the bulletin...
|
||
|
Tue May 13 2008 10:46pm |
|
| Zilch Member Since: 20 Mar 2006 Location: Sydney, sometimes the Whitsundays Posts: 2835
|
Bobby many thanks, be interesting to see whether they try charging me for the possible replacement pads due to excessive wear, due to |
||
|
Wed May 14 2008 7:07am |
|
poor alignment. It is in again tomorrow.
| Zilch Member Since: 20 Mar 2006 Location: Sydney, sometimes the Whitsundays Posts: 2835
|
Well the work was done at ALTO today, full clean and removal of dust build up, realignment, readjusted and SOFTWARE update to help cure it (not sure how it will cure dust build up). Apparently mine was the 3rd they had done that day at that dealer alone, so a common issue i would think.
|
||
|
Thu May 15 2008 8:19am |
|
| Bobby Member Since: 07 Jun 2005 Location: Kuala Lumpur Posts: 3781
|
Hope your problem is solved! |
||
|
Thu May 15 2008 11:09am |
|
|
|
| All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2005-2025 Futuranet Ltd & Martin Lewis
