RRSPORT.CO.UK • View topic - How to guide - Valve cover (intake manifold) replacement.


		^ Advertise here ^ RRSPORT.CO.UK
		Forum Gallery Shop Sponsors

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In

Home > General > How to guide - Valve cover (intake manifold) replacement.

Page 1 of 1

PC76

Member Since: 01 Oct 2017
Location: Northwest
Posts: 402

How to guide - Valve cover (intake manifold) replacement.

Hi All,

Now that i have got the parts needed to sort my leaking manifold im looking round for a good how to guide. using the WSM it moves all over the place from one section to another, and im sure not everything needs to be completly removed i.e. aux belt etc.) to complete the job.

I have serched both on hear and the disco forum along with Youtube but havent managed to locate anything yet...

Thx

Fri Mar 26 2021 11:02am

Andy K

Member Since: 18 Sep 2015
Location: GL
Posts: 4946

2005 Range Rover Sport TDV6 HSE Rimini Red

It's not an easy jiob!
As a minimum.

Injectors need removing.
Fuel rail need removing and the mounting bracket

There is a bolt which is under the cambelt cover, and this is probably why the aux belt needs removing, to then undo the cambelt cover!

Fri Mar 26 2021 12:00pm

RRSTDV8

Member Since: 12 Aug 2011
Location: Northamptonshire
Posts: 8980

2012 Range Rover Sport SDV6 HSE Orkney Grey

I think it genuinely is a big job. When I had the inlet manifold changed on my SDV6, it was a whole day with two blokes on it. Apparently there is a lot of stuff that has to come off and then go back on which takes the time. This is with an indie, not a dealer looking for an excuse to charge a fortune and take an age doing the job. 2012 SDV6 - it's missing a couple of cylinders
2008 TDV8 - it was a labour of love and is much missed

Fri Mar 26 2021 3:01pm

PC76

Member Since: 01 Oct 2017
Location: Northwest
Posts: 402

Thanks for the replys, if i had a decent indi local to me i would get them to do the work no problems. as i dont then im left to do it myself.

i have next week off so have pleny of time and no need to rush.....

Fri Mar 26 2021 3:08pm

keith63

Member Since: 02 Sep 2019
Location: south staffs
Posts: 78

2012 Range Rover Sport SDV6 HSE Lux Santorini Black

I have just had my second one done at an Indie Garage ( Ultimate 4x4 )
it took them a whole Day to replace .

Fri Mar 26 2021 3:08pm

RRSTDV8

Member Since: 12 Aug 2011
Location: Northamptonshire
Posts: 8980

That's why I had both done when one split last year. The biggest cost in the job is the labour required to do it and half of the stuff needs to be taken off whether you do one or both sides. 2012 SDV6 - it's missing a couple of cylinders
2008 TDV8 - it was a labour of love and is much missed

Fri Mar 26 2021 4:11pm

keith63

Member Since: 02 Sep 2019
Location: south staffs
Posts: 78

wise advice from an experienced RRS owner

Fri Mar 26 2021 5:13pm

PC76

Member Since: 01 Oct 2017
Location: Northwest
Posts: 402

Well a slow 7 hrs and it’s off...

Where do all those bolts go now....

Tue Mar 30 2021 10:08am

RRSTDV8

Member Since: 12 Aug 2011
Location: Northamptonshire
Posts: 8980

7 hours to strip it down? So my indie wasn't far off when he said it was a big job.

That battery box base looks like it's had a spillage happen in to it. 2012 SDV6 - it's missing a couple of cylinders
2008 TDV8 - it was a labour of love and is much missed

Tue Mar 30 2021 2:03pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum